Purchased this in order to cut 1.25” thick foam to insulate the overhead garage door. I really dreaded cutting the foam because it normally results in a huge mess but with this tool there is no mess. The tool worked great and I would highly recommend it for anyone that plans to cut foam. It made cutting easy and found it great to make detailed cutouts as well with the leftover foam. I called a garage door company to get a price on insulating the door and they wanted $1,300.00 but with this tool and $65 of R6 foam I was able to do it myself in about 1 hour.

The AC adapter seems to have died after using it for several minutes. It worked perfectly for many shorter uses before that. I was adding some details in an EVA foam piece using the 10cm pen when I noticed that it was getting harder to cut the foam. I realised that the adapter light was off. I thought that maybe it had overheated, but when I tried it the next day, the adapter still wouldn't work. I emailed GoChange support, but got no response. I tried again about a week later and still nothing. Months after that last email, I'm leaving this review. I was hoping to hear something from them because many reviews here said their customer support was great, but that's not the case here.

Bueno y funcional, al.momento. Esperó sea duradero.

Cumple su función

This thing worked great... until it didn't. It stopped working the second time using it after 10 minutes. It just turned off and never was able to turn back on again. Too bad, because it cut the foam well while it was working. The window to return has passed, so now I'm stuck with this thing. Avoid if possible and research better quality cutters.UPDATE: After posting my negative review, GOCHANGE reached out, apologized for the bad experience, and replaced the defective AC adapter at no charge. I tried it out and it seems to be working again. Thank you for making things right!

Looking for a tool to cut through foam quickly, easily and mess-free? This is tge product for you! After using this product for only an hour, I'm ready to give it 10 out of 5 stars.I make insulated beds for the stray cats that stay on my property out of styrofoam coolers, so they have a place to sleep and stay warm in the winter. I used to use a utility knife to cut the foam and it got the job done, but it left a mess to clean up after. Not sure why it took me so long to look into a specific tool to use for this job, but I found it with the GOCHANGE Foam Cutter. This foam cutter gets the job I need done in a fraction of the time it took to cut with a utility knife, with zero mess to clean up afterwards!You get three types of cutting tools - two thicker pen-type cutters (short and long) and a bow that uses much thinner wire as the pens, with a spool of extra wire you can use to replace as needed. Simply choose your cutter, snap it into the handle, switch the tool on, wait 10 seconds or less for the pen or wire to heat up, and start cutting. The tool heats up the styrofoam as you move the tool through it effortlessly, no small bits of foam are left behind, and the cut surface is smooth and clean. It's really that simple! The hardest part of using this tool is having a steady hand to make accurate, straight cuts, but that is not a fault of the tool at all! I really wish I would have thought to look for something like this sooner. I purchased this at retail for $30 (at the time of this writing it is 10% off), and it was well worth the price for the convenience, ease-of-use and all the parts included with the kit.Another convenient use for this product I found - if you have foam that has been cut and left a rough edge that continues to shed pieces of foam, you can use this tool to "cauterize" the area - either shave a little bit of the jagged edge off or use the tool to burn the area, and it will stop the shedding of loose pieces of foam.Another reviewer mentioned about fumes given off from the heat and I will agree that this should be used in a well-ventilated area, even wearing a face mask to prevent breathing in any fumes is a good idea. Really the only time I encountered the tool giving off any kind of fumes is when it is turned on and heats up, if there is any kind of residue left on the pen or wire from previous use. The manual says to wipe the tool off with a wet sponge after it has been turned off and cooled down to remove any blackened burnt-on foam; I found this method to be completely ineffective, as once you turn the tool off and it cools down any material burnt on the tool it will not come off easily once it has cooled. I used a dampened paper towel to quickly wipe the tool while it is still on - this was much more effective. If you are going to do this, make sure you use enough paper towel so that you will not burn your fingers, and make sure it is damp!

Great tools and works well.

Easy to use and very efficient. I cutted throught 3'' foam like it was butter. Beware of fumes, need good ventilation !

The media could not be loaded.

This is a wonderful and very useful tool kit in preparing various landscapes for my dioramas. It is easy to use and comes with a variety of attachments. I have purchased many products from "GOCHANCE" to my satisfaction with all products.