Your cart is empty.
Your cart is empty.The original STUBBY Car Drying Nozzle for EGO Leaf Blowers is the perfect accessory to turn your leaf blower into the ultimate car drying machine! The short 8” length of the STUBBY nozzle (11" less than the stock blower tube) makes the blower much more maneuverable when drying your vehicle and the slightly smaller and tapered tip directs the air into a tight stream allowing for even faster drying times. Compatible with EGO leaf blower models: 530 CFM (LB5300 / LB5302), 575 CFM (LB5750 / LB5754), 580 CFM (LB5800 / LB5804), 615 CFM (LB6150 / LB6151), 650 CFM (LB6500 / LB6504), 670 CFM (LB6700 / LB6703), 765 CFM (LB7650 / LB7654 / LB7654-2). Which generation is my blower? If your blower was manufactured after 2019, select the "New generation" option. If your blower was manufactured before 2019, select the "Old generation" option. Compare your blower to the last product image provided above to determine which generation you have. The model of your blower has no correlation to the generation.
Mp
Reviewed in the United States on January 19, 2025
I use this with my ego leaf blower to dry my suv and gti.It does not detach easily but it dries the cars
Jon O.
Reviewed in the United States on September 20, 2024
Works great, latch mechanism is solid…so solid it’s hard to get off. Yes, I’m following the video exactly as instructed.
John
Reviewed in Canada on March 17, 2024
It fits well snug & blows water off my car in seconds. No more towel drying ðŸ‘. Well worth it!
Scott Astro
Reviewed in the United States on December 30, 2024
Works exactly as intended to blow all the water off the car. Its short stubbiness makes it effortless to menuver around the car without worrying about scratching it.
Sandi
Reviewed in the United States on August 27, 2023
The Stubby Nozzle goes on easy. It works well. I hope I can remove it.I watched the video showing to push on the top and bottom of the nozzle causing the sides to bow out which will release the pressure on the Ego retention bump. It did not work. I am strong with good hand and arm strength.I tried a clamp and put a little pressure on it. Nope.I tried the clamp with more pressure. NopeI do not think I can remove it without destroying the retention mechanism.Where is my Dremmel?I will remove it and return it. I see that Ego will soon be selling a similar stubby nozzle and I'm sure it will go on and come off easily.
Dave Moberg
Reviewed in Canada on June 2, 2023
I’ve only had this Stubby Nozzle since April. It literally broke while switching out nozzles which I’ve done dozens of times without issue. It’s almost as though the plastic became brittle over time. Seeing as how much I paid for this piece of plastic,I’m very disappointed.
Wade Carlson
Reviewed in Canada on May 30, 2023
Woeks great for drying the truck after washing.
techracer
Reviewed in the United States on May 25, 2023
I was a bit skeptical about this before I bought it but it has been a game changer for drying the cars after a wash. So much easier to control than with the longer tube and no fear of scratching the paint with the end of the nozzle.It's a bit pricey but i love it!
Todd Michaels
Reviewed in Canada on May 18, 2023
A bit tricky to remove but otherwise very good.
ILuvFunStuff
Reviewed in the United States on May 13, 2023
This is a very well made piece. I was surprised at how sturdy it is for being a 3D printed nozzle. It's super easy to put on, but a little tricky to remove. If I watch the video on how to remove it, it works perfectly every time. I just have to remember how so i don't have to keep referencing the video!The blowerband on the end really comes in handy, as I have definitely bumped my paint many times while using it while drying my car.Overall, great investment for helping keep my car swirl mark free!
Peter Chin
Reviewed in Canada on December 27, 2023
nice attachment for converting the leafblower to a vehicle dryer, it makes it a lot easier to maneuver versus the OE snout
Sky
Reviewed in the United States on January 1, 2023
I recently purchased the Stubby Nozzle Co. Stubby Car Drying Nozzle for my EGO leaf blower and I couldn't be happier with my purchase. This nozzle has made the process of drying my car after washing it a breeze!One of the things I love most about this nozzle is its compact size. It fits perfectly on my EGO leaf blower and is easy to handle and maneuver around my car. The stubby design also makes it easy to store when not in use.The performance of the Stubby Nozzle Co. Stubby Car Drying Nozzle is also impressive. It produces a strong and concentrated jet of air that effortlessly removes water droplets from my car's surface. The adjustable airflow settings allow me to customize the strength of the airflow to suit the specific needs of my car.I am also impressed with the durability of this nozzle. It is made of high-quality materials that can withstand the wear and tear of regular use.Overall, I am extremely satisfied with my purchase and would highly recommend the Stubby Nozzle Co. Stubby Car Drying Nozzle to anyone in need of a reliable and efficient car drying tool. Five stars all around!
AmyB
Reviewed in the United States on December 25, 2022
Just got this for Christmas, it is hovering around zero degrees here so I couldn’t wash the car, but did hook it up to my blower to test it out. This will have great drying power, it was super easy to install, is very lightweight which makes the dryer easy to maneuver. Love the soft touch band as it will be very helpful in preventing any accidental scratches from getting too close to the vehicle. Great product!
Recommended Products
