Your cart is empty.
Your cart is empty.Brand new split grommet seal by Seals It. They are great for use with wiring, hoses or lines going through firewalls or other bulkheads in your vehicle. 3" outside diameter with 1/2" inner diameter. Can cover holes as large as 2-1/4". Made from a combination of fire-retardant rubber and anodized aluminum bezel. Keeps unwanted smoke and fumes from entering the driver's area. Protects lines or wiring from chafing and abrading on rough surfaces. They make a great finishing touch for your project. The unit comes in two half-part sections so that it can be mounted on an existing installation without disturbing anything. Installs with rivets or screws (not included). Qty 1 grommet
Dave C
Reviewed in the United States on April 8, 2023
Used this to protect a bundle of cables going through car firewall where the old grommet had fallen apart. Only complaint is that it's too expensive, but seems to be the only product that fills this need.
DavidK
Reviewed in the United States on August 19, 2021
The first thing I noticed about the grommet is that the mounting holes are not evenly spaced around a circle. If you use the grommet itself as a drill guide that won't matter. But I wanted to use threaded inserts for mounting it, the holes for them had to be very accurately located, thus requiring a real drill guide. I used a Bridgeport mill with a DRO to measure the location of the holes, each to within about 0.002 inch. I then made a drawing and a drill guide of 1/2-inch aluminum plate with a 1/4 inch hole at the center of the bolt circle. With this and a hole saw for the large center hole the grommet was easy to mount. But this took a lot of stuff that the average car guy won't have.
Recommended Products