Your cart is empty.
Your cart is empty.Genuine Lexan brand polycarbonate sheet
AM SMITH
Reviewed in the United States on January 16, 2025
showed up fast and it is a quality product
DAR
Reviewed in the United States on August 13, 2024
Perfect for my needs. Easy to cut and drill. Very pleased.
milan d lunsford
Reviewed in the United States on July 28, 2024
I used this to make a window. I worked great but I was sure the listing said 24x40 inches. Measured 24x38. A little short. I was able to adjust my frame and use it anyway. It cuts and shapes easily. Also not Lexan as pictured. But another brand.
Stride
Reviewed in the United States on July 14, 2024
I used these on Anderson windows that crank out sideways with a portable A/C. I purchased the Anderson screen clips to hold it in place just like the screen. I used the screen to cut to size. I cut with a quality jigsaw, very easy. When screwing into it, follow the chart on the protective sheet, your drill bit will be pretty close to the width of the screw. It might crack if you try to screw into a hole too small whereas, the screw holds very well if you follow the chart. Obviously leave the front and back protective sheet on until done cutting/drilling/screwing.
bress1
Reviewed in the United States on June 26, 2024
Genuine Lexan, very strong, was easy to cut to size. No issues here!
Mark M. Dunlap
Reviewed in the United States on March 29, 2024
Needed to replace to 11â€-ish x 41â€-ish broken glass panes in a bedroom window. Researched the best method for cutting this Lexan and found that a high tooth count carbide tipped blade was recommended for a circular saw, as I do t have a table saw. Well, I didn’t have one of those blades handy, so I used the basic blade that was in the saw. I encountered no problems with chipping at all (I did go relatively slow with the saw).It also helped that this has a bit of flex to it, unlike glass, so that I could navigate it into the frame more easily.
RiBurton
Reviewed in the United States on April 23, 2023
I bought this because it had the exact dimensions of what I needed for a bar top for a small bar that had open slats for a bar top. I had to sand down the edges and corners as they were very sharp but did not have to cut it, which was a plus. As a bar top this does seems to scratch easier then I thought it would. I get scratches on it just about evey time I use it and It's not like I am abusing it. They just seem to appear. I suppose it is not the best use of this, but it does work ok and for the price it was a decent solution.
Bill
Reviewed in the United States on June 19, 2022
This was some good stuff. I was able to drill holes close to the edge, and use it for a windshield! It remains clear, no cracks, and it can flex as needed! Good stuff!
Cabbycarl
Reviewed in Canada on August 5, 2020
Using for cough and sneeze shield in my taxi. .1/4 inch is hard to bend but works
PN
Reviewed in Canada on August 20, 2020
Sturdy polycarbonate. It's meant for someone who doesn't mind scratches or cosmetic flaws (ex. shielding in a retail environment is probably fine).For a dry erase board, it's disappointing. All 4 corners have damage from poor handling of the material. I would've suspected the delivery company caused it but there's also scratches and gouges on the face of the material (despite the protective film). This makes me think the issue is due to poor manufacturing practices. That said, the marks won't be very obvious unless they create a shadow (as seen in the last picture) or if you're drawing on it. Your marker will deposit ink into the gouges, creating permanent eyesores.
Dogman
Reviewed in Canada on August 19, 2020
Great quality and fast delivery from a professional company from Toronto. Plastic world thank you.
JM
Reviewed in Canada on November 4, 2020
I used it to replace a screen and attach an AC hose to exhaust a portable unit in a style of window you could not use a standard expanding window adapter that came with the AC unit. Cut well using a jigsaw to adjust size and make circular hole for hose. Excellent value and quality.
Manj
Reviewed in Canada on November 2, 2020
Used this 1/4â€, 24â€X48†clear, glass lookalike sheet for window well around the house. It is durable compared to one sold in hardware stores which are flimsy, lasted hardly 1yr. It can be formed with jig saw with metal 18 tooth blade, drill able, can be buffed to remove scratches.
Recommended Products
