Your cart is empty.
Your cart is empty.The stock liquid-to-liquid oil cooler uses engine coolant to draw heat away from the oil and vent it through the engine radiator. It's a stout design that typically performs well for daily driven trucks. However, after over 12 years of service, many of those stock coolers have seen better days. A clogged or leaking oil cooler can reduce the oil's ability to transfer heat to the coolant, causing thinning and a loss of protection for critical engine components. That's why Mishimoto is proud to offer a stock replacement compatible with the 2003-2007 Ford 6.0L Powerstroke. This replacement cooler, complete with new seals and o-rings will restore your 6.0L Powerstroke's oil cooling and protect your engine from unnecessary wear. This cooler is a direct fit and provides all the cooling a daily driven 6.0L needs at an affordable price point. For even more protection, check out our Coolant Filter Kit and Catch Can Kit also compatible with the 2003-2007 Ford 6.0L Powerstroke. Like all Mishimoto products, this stock replacement oil cooler is backed by our Mishimoto Lifetime Warranty for a lifetime of worry-free driving.
T.G
Reviewed in Canada on January 28, 2025
We repair a lot of vehicles and require this item a llit. Its a great product , fits properly. I will buy again
Zach
Reviewed in the United States on January 16, 2025
Comes with everything required and works well, have put a good amount of miles on it since the install and oil temps are the same or better than the OEM piece. Usually it is recommended to only use the OEM cooler, but this one works great, fits well, and comes with everything you need for the install.
Great deals
Reviewed in the United States on September 25, 2024
Works great haven't had a problems since I replaced it
Dave T.
Reviewed in the United States on June 2, 2024
Quality product no leaks or problems installing
Robin Green
Reviewed in the United States on May 22, 2024
The first photo is the old one second photo is the new one.I installed the new mishimoto oil killer. Use their gaskets and O-rings. Looks and feels to be of good quality and amazing workmanship. At this time it looks and seems to be as good as OEM if not better. Only time will tell. I pull a 12,000 pound 38 foot bumper pull camper. So keeping the all cool as I must. Will update in a couple of months to let you know that if it’s still working or if it fails. This truck is my daily driver and my work truck.
Stephanie Seals
Reviewed in the United States on December 12, 2024
Just failed. Less then 10k miles and one and a half years. Has a lifetime warranty and I spoke with them twice and they still hadn't sent my replacement. And it's been over a week when they told me I would receive an email within 48hrs when it is shipped.
Kaitlyn Fraser
Reviewed in Canada on January 11, 2024
I bought the product for my 06 6.0, fitment was fine I used a ford main gasket as some said fitment was not great with the Meto one. After install my deltas we’re really no better then before +/- 12-20. This is more then what is standard. I did flush the system multiple times prior to install. No fluids are mixing but delta are not ideal. With the amount of work to install I was hoping for better results. Previous cooler was not mixing either but was leaking from gasket so decided to replace. Now deltas are worse then before.
Carl D Moore
Reviewed in the United States on December 26, 2023
Fit perfect all the gaskets were well made installed working well Temps stay within 4 degrees now no leaks at all
Chris
Reviewed in the United States on December 14, 2023
Installed this Mishimoto oil cooler on my 2004 f250 6.0 Diesel. This cooler was a third of the cost of an OE replacement. So far my deltas are good at 9-11 degrees and no signs of leaks or issues. For those of you thinking about tackling this job be sure to watch DIY videos and make sure you have the correct tools needed to complete the job. Clean everything and torque in order and to set values, take your time and you’ll have a successful repair.
Gabriel.
Reviewed in the United States on November 17, 2023
Cooler is great but the gaskets and seals ooh naah... had to buy a better quality set.
Recommended Products
