Your cart is empty.
Your cart is empty.Customer
Reviewed in Canada on January 7, 2025
Good quality and cute. We love it.
Customer
Reviewed in Canada on January 7, 2025
Good quality and cute. We love it.
Tink
Reviewed in the United States on January 30, 2025
So great! We have a very old house and cannot hang towel bars on the wall without doing a lot of damage. So his is exactly what was needed.
Tink
Reviewed in the United States on January 30, 2025
So great! We have a very old house and cannot hang towel bars on the wall without doing a lot of damage. So his is exactly what was needed.
Larry Tincher
Reviewed in the United States on January 12, 2025
Well made, good value
Little Flower
Reviewed in Canada on January 12, 2025
Sturdy and elegant.
Larry Tincher
Reviewed in the United States on January 12, 2025
Well made, good value
Little Flower
Reviewed in Canada on January 12, 2025
Sturdy and elegant.
Colleen Rohrbaugh
Reviewed in the United States on September 20, 2024
Not very sturdy, there are only 2 beach towels hanging on this rack and it wants to lean and fall , i have tightened the weighted base and still leaning
Colleen Rohrbaugh
Reviewed in the United States on September 20, 2024
Not very sturdy, there are only 2 beach towels hanging on this rack and it wants to lean and fall , i have tightened the weighted base and still leaning
George6
Reviewed in Canada on July 7, 2024
This drying rack is well made and goes together securely. When assembled, it is steady and plumb. Wish I had another one.Assembly instructions do not show sequence of steps, so here are some tips:The large "washer" goes between the heavy metal base and the polished cover. It must be aligned between the base and cover while both are held horizontally.Still holding all three parts horizontally, the small washer and hex screw must be inserted from below and tightened a bit while the base is held horizontally.Then hold the first standing rod in place over the base and finish tightening with something stronger than the hex wrench supplied.The second standing rod goes on without problem, but note the the screw socket inside the bottom of the rod is recessed further than the screw socket at the top of the rod.When adding the final assembly with the drying arms, only the top arm needs to be turned to seat the screw on the bottom of the assembly into the top screw socket on the standing rod. This takes quite a bit of turning until the rubber gasket has sunk into the standing rod.About a 10 minute job, when directed how to do it by my wife, who also did most of the holding.
George6
Reviewed in Canada on July 7, 2024
This drying rack is well made and goes together securely. When assembled, it is steady and plumb. Wish I had another one.Assembly instructions do not show sequence of steps, so here are some tips:The large "washer" goes between the heavy metal base and the polished cover. It must be aligned between the base and cover while both are held horizontally.Still holding all three parts horizontally, the small washer and hex screw must be inserted from below and tightened a bit while the base is held horizontally.Then hold the first standing rod in place over the base and finish tightening with something stronger than the hex wrench supplied.The second standing rod goes on without problem, but note the the screw socket inside the bottom of the rod is recessed further than the screw socket at the top of the rod.When adding the final assembly with the drying arms, only the top arm needs to be turned to seat the screw on the bottom of the assembly into the top screw socket on the standing rod. This takes quite a bit of turning until the rubber gasket has sunk into the standing rod.About a 10 minute job, when directed how to do it by my wife, who also did most of the holding.
Claire Hangen
Reviewed in the United States on December 30, 2024
Nice looking towel rack. Easy to assemble
Claire Hangen
Reviewed in the United States on December 30, 2024
Nice looking towel rack. Easy to assemble
Rubelyn Burhans
Reviewed in the United States on December 27, 2024
It's perfect size for my little bathroom!! Easy to assemble. And looks great with the rest of the fixtures in my bathroom. Not too expensive. I'm lovin it!💓
Rubelyn Burhans
Reviewed in the United States on December 27, 2024
It's perfect size for my little bathroom!! Easy to assemble. And looks great with the rest of the fixtures in my bathroom. Not too expensive. I'm lovin it!💓
Ralf Z.
Reviewed in Germany on December 14, 2024
Leider sind diese die Stangen zum aufhängen von Standart Handtüchern zu kurz. Das finde ich sehr schade…
Ralf Z.
Reviewed in Germany on December 14, 2024
Leider sind diese die Stangen zum aufhängen von Standart Handtüchern zu kurz. Das finde ich sehr schade…
louise cyr
Reviewed in Canada on November 9, 2024
Serviettes
louise cyr
Reviewed in Canada on November 9, 2024
Serviettes
CB
Reviewed in the United States on November 7, 2024
Convenient to use where I can't have a towel rack and easy to assemble. Just wish it was more stable or had a heavier base.
CB
Reviewed in the United States on November 7, 2024
Convenient to use where I can't have a towel rack and easy to assemble. Just wish it was more stable or had a heavier base.
RenLo
Reviewed in the United States on January 3, 2024
I recently purchased the Freestanding Towel Rack, , with high hopes of adding both style and functionality to my space. Unfortunately, my experience with this product has left me less than satisfied, primarily due to the subpar quality of materials used in its construction.Let's start with the most glaring issue: the cheap materials. The entire structure of the towel rack feels flimsy and lacks the durability one would expect, especially considering its advertised purpose. The metal components appear thin and prone to bending, and the lightweight nature of the rack compromises its stability. The weighted base, which should provide support and prevent tipping, is not substantial enough to counterbalance the height of the rack, making it wobbly and unstable.while the Freestanding Towel Rack may be an affordable option, the compromise in quality is evident in its construction. The use of cheap materials results in a product that fails to meet expectations in terms of stability, durability, and overall satisfaction.
RenLo
Reviewed in the United States on January 3, 2024
I recently purchased the Freestanding Towel Rack, , with high hopes of adding both style and functionality to my space. Unfortunately, my experience with this product has left me less than satisfied, primarily due to the subpar quality of materials used in its construction.Let's start with the most glaring issue: the cheap materials. The entire structure of the towel rack feels flimsy and lacks the durability one would expect, especially considering its advertised purpose. The metal components appear thin and prone to bending, and the lightweight nature of the rack compromises its stability. The weighted base, which should provide support and prevent tipping, is not substantial enough to counterbalance the height of the rack, making it wobbly and unstable.while the Freestanding Towel Rack may be an affordable option, the compromise in quality is evident in its construction. The use of cheap materials results in a product that fails to meet expectations in terms of stability, durability, and overall satisfaction.
Recommended Products