Your cart is empty.
Your cart is empty.Product Description
How to diagnose solenoids are bad
- 1. Check the engine light is on.
- 2. The front and rear shifts are unstable or stuck, or the downshift/reverse is rejected.
- 3. The transmission pan is loose or the gasket is worn out, causing the transmission to leak
- 4. efficiency is declining and the consumption is larger than before.
Repair and check engine lights on and resume driving performance:
actuators are an important part of automotive engines. When a actuator fails, you may experience drivability degradation, and fault codes that will cause the engine indicator (CEL) to be lighted on.
When the actuator fails, the common fault codes include: P0010 and P0011,P0013, P0014. At this time,you need to replacing the actuator, so that you can resume driving performance.
Reference Number:
153300T020,1533037020,917-236
Compatibility：
2011-2014 for Lexus CT200h
2009-2010 for Pontiac Vibe
2008-2014 for Scion xD
2009-2014 for Toyota Corolla
2009-2014 for Toyota Matrix
2010-2014 for Toyota Prius
2012-2014 for Toyota Prius V
Replacing the timing solenoids:
The solenoid is installed on the core of VVT solenoid . When the solenoid is electrified, the core is sucked up and the is opened. When there is no electricity, the core will automatically close under the action of the spring
The performance of a actuator is damaged:
(1) Voltage damage of automobiles
(2) Incorrect oil pressure
$115.88
$ 52 .99 $52.99